In Line Figure 8 Loop
The In Line Figure 8 Loop is used for a load that will be more or less parallel to the standing part. This loop knot can be pulled through a pulley easier than other loop knots.
Start with the standing part of the rope.
Twist the standing part to create a loop, as shown.
Bring the loop behind the standing part.
Wrap the loop back around the standing part.
Insert the loop back through itself, to the side of the standing part that comes down out of the knot.
Finished In Line Figure 8 Loop - Front View
To dress the knot, pull the standing part coming out of the top of the knot. Then pull on the loop to set the knot.
Finished In Line Figure 8 Loop - Opposite View
Click on the Piece of Eight to return to the Main Page